Welcome To Readyseal.com

Ready Seal Product Page
Ready Seal, Inc. has a full line of exterior wood care products for all of your wood restoration needs. Our products include: 80 Brightener, 123 Cleaner/Remover and 125 RP Excellence. These products are available to authorized contractors only. Please contact your Ready Seal representative for pricing information.

Product Description
#80 Brightener is a slightly yellow liquid with little to no odor. Use #80 brightener to remove oxide stains such as rust or zinc oxide from wood and to neutralize sodium hypochlorite and other caustic wood cleaners before the sealing process. #80 brightener is used to remove rust and zinc oxide stains from wood. For best results follow instructions carefully.

Application Instructions

Step 1:	After cleaning wood check the surface. If any black or rust colored stains remain, pour #80 brightener into a pump-up garden sprayer for use on small areas. For large areas use a Ready Seal 8000 series sprayer with 150 feet of 1/4" hose
Step 2:	Spray one moderate coat over the entire surface of the wood. If stubborn stains remain, reapply to stained area.
Step 3:	Empty remaining brightener into a container and save. Rinse sprayer with water, flushing three time with clean water.

Warning
#80 brightener will not harm most plants. However, if #80 Brightener is ingested internally it could be fatal to humans and pets.

Product Description
TUFF-STUFF is a clear, long lasting permanent, penetrating, water sealant. It may be applied on brick, wood, concrete, stucco, concrete block, roofing and other types of building materials. TUFF-STUFF is designed to tolerate all different types of weather conditions. TUFF-STUFF allows for expansion and contraction with temperature changes without harming water proof properties. TUFF-STUFF cures into a water proof seal that will stretch 360% and will not stain or enhance any surface after completely cured. It cures best in high humidity atmospheric conditions and adds skid resistance to concrete, stone and other porous surfaces. It will seal all porous surfaces and most cracks. TUFF-STUFF water sealant is made with the highest quality, solvent base, siloxane available. Unlike most water proofing solutions, TUFF-STUFF water sealant is a penetrant and not a coating. It prevents freeze-thaw cracking, salt leaching, and water penetration. Concrete should be cured for thirty (30) days before sealing to allow total penetration. Oil, dirt and debris must be removed before sealing. For Application Instructions see the product label.

Product Description
#123 Cleaner/Remover is a weak paint remover. #123 is used to remove READY SEAL from non - galvanized surfaces. Apply generously with a brush, allow to soak. then agitate with stiff brush and power wash off with water using 1500 psi. Always wear face shield, rubber gloves and rubber apron.

Warning!
This product contains sodium hydroxide. Contact with eyes may cause permanent damage. If eye contact occurs hold eye open and flush with clean water for fifteen (15) minutes and seek immediate medical attention. If skin contact occurs, wash with soap and water immediately. If rash occurs, seek medical attention.

Product Description
#125 will remove:
GREASE,DECK STAINS, LATEX PAINT, ACRYLIC PAINT, READY SEAL WOOD SEALER, BUMPER STICKERS,OIL, LUMBER CRAYON, MILL GRADE MARKS, ASPHALT, INK, FLOOR TILE, ADHESIVE, PRESSURE SENSITIVE LABELS,FLOOR WAX, AND FINISHES.

Warning
When #125 is used in full strength it will ETCH GLASS, ALUMINIUM, BRASS, AND OTHER SOFT METALS.